MURATEC

スクロール
NEW TOPICS
MURATEC MACHINE TOOLS
Efficient Automated Accurate

RECORDS Introduction to
MURATEC’s Variety of Experiences

      • Intermediate Pinion
      • Input Pinion
      • Overdrive Gear
      • Gear Counter Drive
      • Gear Counter Driven
      • Gear Generator
      • Shaft Rotor
      • Generator Shaft
      • Damper Hub
      • Tube Guide
      • Drive Shaft
      • Differntial Ring Gear
      • Hub
      • Magnet Plate
      • Motor Rotor Shaft
      • Idler Gear
      • Outer Ring
      • Outer Race
      • Output Shaft
      • Intermediate Shaft
      • Internal Gear
      • Inner Ring
      • Input Shaft
      • Impeller Hub
      • Counter Shaft
      • Counter Drive Gear
      • Counter-driven Gear
      • Gear Counter Driven
      • Gear Parking Lock
      • Gear Internal
      • Gear, Differential Ring
      • Carrier
      • Carrier Cover
      • Crown Wheel
      • Clutch
      • Clutch Piston
      • Sun Gear
      • Sheet Holder
      • Sheave Primary
      • Sheave Sliding
      • Shaft Counter
      • Shaft Stator
      • Shaft Drive
      • Cylinder Primary
      • Cylinder Primary Sleeve
      • Synchronizer Sleeve
      • Stator Shaft
      • Speed Gear
      • Spline Hub
      • Sprocket
      • Spacer
      • Sleeve
      • Turbine Hub Runner
      • Differential Ring Gear
      • Differential Pinion
      • Transfer Gear
      • Drive Pulley Shaft
      • Drive Pinion
      • Drum
      • Driven Gear
      • Driven Pulley Shaft
      • Parking Gear
      • Hub Sleeve
      • Hub Forward Clutch
      • Hub Brake
      • Balancer Clutch
      • Parking Gear
      • Parking Lock
      • Piston
      • Piston Clutch
      • Pinion
      • Forward Driven Gear
      • Planetary Ring Gear
      • Flange
      • Forward Driven Gear
      • Front Inner Carrier
      • Front Cover
      • Front Carrier
      • Front Carrier Assy
      • Front Carrier Plate
      • Front Planetary Carrier
      • Front Planetary Plate
      • Front Boss
      • Brake Cylinder
      • Pulley Drive
      • Pulley Driven
      • Bearing Outer Ring
      • Bearing Inner Ring
      • Middle Carrier
      • Transmission Hub
      • Rear Carrier
      • Rear Carrier Assy
      • Rear Clutch Hub Assy
      • Rear Sun Gear
      • Rear Planetary Carrier
      • Reduction Carrier
      • Reduction Carrier Assy
      • Reduction Gear
      • Reduction Drive Gear
      • Reduction Planetary Carrier
      • Retainer
      • Reverse Idler Gear
      • Reverse Driven Gear
      • Ring Gear
      • Race 1-way Clutch Inner
      • Metal Tube
      • Output Shaft
      • Armature Shaft
      • Alternator Shaft
      • Solenoid Core Assembly
      • Core Stator
      • Seat Holder
      • Screw Nut
      • Stator
      • Sprocket
      • Sleeve
      • Sleeve Solenoid
      • Center Bearing
      • Solenoid Core
      • Turbine Hub
      • Device Housing
      • Drive Shaft
      • Knock Sensor
      • Heat Sink
      • Pinion
      • Flange
      • Bracket
      • Brushless Pump
      • Pulley
      • Bearing Holder
      • Motor Housing
      • Yoke
      • EPS Housing
      • FPS Housing
      • Outer
      • Outer Ring
      • Inner
      • In Board
      • End Rear Axle Housing
      • Gear
      • Crown Gear
      • Cage
      • Side Gear
      • Sun Gear
      • Shaft End
      • Journal
      • Spider
      • Sliding Joint Outer
      • Sliding Joint Inner
      • Socket
      • Differential Gear
      • Differential Pinion
      • Divider
      • Differential Case
      • Differential Side Gear
      • Differential Pinion
      • Differential Bevel Gear
      • Trunnion
      • Triport
      • Hypoid Gear
      • Hub
      • Hub Outer Ring
      • Hub Inner Ring
      • Final Gear
      • Flange Companion
      • Bearing Retainer
      • Ring Gear
      • Outer Race
      • Inner Race
      • Input Shaft
      • Worm
      • Core
      • Shift Fork
      • Shaft Worm Wheel
      • Stator
      • Spacer
      • Socket
      • Tie Rod End
      • Knuckle steering
      • Nut
      • Pinion
      • Front Holder Body Mounting
      • Ball Joint Socket
      • Ball Stud
      • Ball Bushing
      • Yoke
      • Yoke Plug
      • Rack
      • Rack End Stud
      • Reduction Gear
      • Insert
      • Injector Body
      • Intermediate Shaft
      • Inner Rotor
      • Impeller
      • Wastegate Valve Pin
      • Water Pump
      • Eccentric Shaft
      • Oil Pump
      • Orifice Plate
      • Cup
      • Camshaft
      • Balance Shaft Drive Gear
      • Balance Shaft Driven Gear
      • Crank Gear
      • Crankshaft
      • Crank Pin
      • Core Stator
      • Solenoid Connector
      • Core Lower
      • Control Sleeve
      • Compressor Housing
      • Compressor Wheel
      • Supply Pump
      • Sun Gear
      • Seat Spring Upper
      • Shaft
      • Shaft Idle Gear
      • Shroud
      • Generator Gear
      • Cylinder Supply Pump
      • Cylinder Liner
      • Stator
      • Stator Shaft
      • Spline Hub
      • Sprocket
      • Center Bolt
      • Turbine
      • Turbine Wheel
      • Turbo Plate
      • Tappet
      • Tube Nut
      • Nozzle Body
      • Housing
      • Hub
      • Balancer Gear
      • Balance Shaft
      • Balance Shaft Gear
      • Valve
      • Piston Pin
      • Pinion
      • Flywheel
      • Flange
      • Pulley
      • Helical Gear
      • Bearing Housing
      • Pump Body
      • Lower Body
      • Rotor
      • Rocker Arm
      • Main Fitting
      • Vibrating Ring
      • Inner Hub
      • Clutch Rotor
      • Crankshaft
      • Casing
      • Compressor Shaft
      • Compressor Housing
      • Shaft
      • Cylinder
      • Scroll
      • Piston
      • Piston Cup
      • Front Housing
      • Pulley
      • Lug Plate
      • Rear Housing
      • Rotor
      • Cylindrical Block
      • Swash Plate
      • Inner
      • Inner Rotor Blank
      • Cover Master Cylinder
      • Caliper
      • Caliper Piston
      • Shell
      • Rorter Skid Control
      • Nut
      • Disc Brake
      • Disc Rotor
      • Drum Brake
      • Housing
      • Piston
      • Front Rear Caliper
      • Brake Hub Sleeve
      • Bolt
      • Ball Screw
      • Master Cylinder
      • Idler
      • Impeller
      • Elbow
      • Cover
      • Collar
      • Carrier
      • Gear
      • Gear Outer
      • Gear Planetary
      • Cushion Bearing
      • Crawler
      • Case Bracket
      • Core
      • Control Valve
      • Shell
      • Shoe Retainer
      • Cylinder Bush
      • Cylinder Block
      • Cylinder Head
      • Cylinder Barrel
      • Shoe Plate
      • Sprocket
      • Sleeve
      • Solenoid Valve
      • Solenoid Piston
      • Valve
      • Valve Plate
      • Barrel
      • Pipe
      • Piston
      • Piston Shoe
      • Pinion
      • Pin
      • Bush
      • Bushing
      • Block
      • Material
      • Retainer
      • Relief Valve
      • Roller
      • Solenoid Valve Sleeve
      • Hydraulic Piston
      • Planetary Gear
      • Output Shaft
      • Insert
      • Input Gear
      • Cam Clutch
      • Gear
      • Crankshaft
      • Case
      • Cycloid Gear
      • Servomotor
      • Shaft
      • Center Gear
      • Flange
      • Bearing Holder
      • Retainer
      • Long Stroke Cup Gear
      • Reducer
      • Differential Gear
      • Main Bearing
      • Output Shaft Pin
      • External Gear
      • Input Shaft Crankshaft
      • Input Flange
      • Spur Gear
      • RV Gear
      • Actuator Piston
      • Elbow
      • Coupling Shaft
      • Core Tube
      • Control Valve
      • Cylinder
      • Cylinder Bush
      • Cylinder Block
      • Spindle
      • Spool
      • Thread
      • Socket Adapter
      • Solenoid Stopper
      • Drive Shaft
      • Valve Spool
      • Valve Plate
      • Piston
      • Piston Shoe
      • Brake Piston
      • Plunger
      • Hold Down Plate
      • Retainer
      • Small Holder
      • Pipe Fitting
      • Gear
      • Gear Injection Pump
      • Gear Crankshaft
      • Clutch
      • Clutch Drum
      • Case
      • Cylinder
      • Differential Side gear
      • Screw Cap
      • Body
      • Main Bearing Case
      • PTO Shaft
      • Idle Gear
      • Outer Clutch
      • Outer Comp Clutch
      • Outer Starting Clutch
      • Output Shaft
      • Inner
      • Input Shaft
      • Guide
      • Counter Gear
      • Counter Shaft
      • Cam
      • Camshaft
      • Cam Driven Face
      • Gear
      • Clutch
      • 3rd Driven Gear
      • 3rd Pinion Gear
      • Shaft
      • Sieve Sliding
      • Stator
      • Sprocket
      • Sliding Sleeve
      • Sleeve
      • Center Clutch
      • Dabo Gear
      • Drive Gear
      • Drive Shaft
      • Drive Face Cam
      • Drive Face Boss
      • Driven Gear
      • Hub
      • Gear,Balance Shaft
      • Valve Rocker Arm
      • Final Gear
      • Final Shaft
      • 1st Driven Gear
      • Face Comp Fix Driven
      • Face Comp Moveable Driven
      • Face Drive
      • Face Drive
      • Flange Canceller
      • Front Fork
      • Piston
      • Piston Clutch
      • Pinion Gear
      • Pin
      • Boss
      • Boss Assy
      • Main Shaft
      • Reduction Gear
      • Lifter Plate
      • Ring Starter Gear
      • Yoke
      • Drive Wheel
      • Spur Gear Single Boss
      • Double Boss
      • Idle Gear
      • Adapter
      • Inner Differential
      • Inner Cone
      • Water Pump Gear
      • Water Pump Shaft
      • Counter Gear
      • Cup Spider Bearing
      • Coupling
      • Third Gear
      • Shaft
      • Synchro Cone
      • Synchro Dog
      • Synchro Ring
      • Spider
      • Sleeve
      • Sleeve Nut
      • Second Gear
      • Turbo Housing
      • Tappet
      • Differential Side Gear
      • Differential Pinion Gear
      • Hub
      • First Gear
      • Forth Gear
      • Final Gear
      • Pulley
      • Reverse Gear
      • Outer Ring
      • Inner Ring
      • Inner Lace
      • Cam Floor
      • Tapered Roller Bearing
      • Tapered Roller Bearing Outer ring
      • Tapered Roller Bearing Inner ring
      • Nut
      • Needle Bearing
      • Bush
      • Bearing
      • Retainer Outboard
      • Roller
      • Conical Roller Bearing
      • Cylindrical Roller
      • Outer Ring
      • Ball Bearing
      • Inner Ring
      • Retainer
      • Outer Body
      • Inner Body
      • Carrier
      • Caliper
      • Gear
      • Clutch
      • Sun Gear
      • Spider
      • Driver
      • Hub
      • Hub Axle
      • Hub Shell
      • Hub Axis
      • Brake
      • Brake Cone
      • Motor Housing
      • Ring Gear
      • Insert
      • Elbow
      • Male Adapter
      • Guide Vane
      • Gas Tap
      • Cap
      • Casing Liner
      • Service Gas Tap
      • Short Elbow
      • Stem
      • Spindle Nozzle
      • Socket
      • Tees
      • Knob
      • Nut
      • Nipple
      • Screwcock
      • Valve
      • Plug
      • Body
      • Body Assy
      • Ball Valve
      • Meter Unit
      • Union
      • Square Nipple
      • Steel Pipe Fitting
      • Seating Faucet Elbow
      • Faucet Fitting
      • Hydrant
      • Connection
      • Fitting
      • Semiconductor Valve
      • Cover
      • Antifreeze Faucet
      • Branch Tube
      • Insert
      • Elbow
      • Coupling
      • Coupling Socket
      • Cover
      • Camshaft
      • Collar
      • Gas Pipe Connector
      • Gear
      • Gear Shaft
      • Cooler Connector
      • Crank Gear
      • Crankshaft
      • Casing
      • Case
      • Compressor Cylinder
      • Compressor Cylinder Head
      • Shaft
      • Axis
      • Screw Nut
      • Scroll
      • Spindle Nozzle
      • Spray Gun Nozzle
      • Thrust Plate
      • Sleeve
      • Swashplate
      • Sensor Cover
      • Solenoid
      • Dial Gauge Body
      • Chip
      • Tube
      • Door Closer
      • Door Hinge
      • Drive Gear
      • Drum
      • Drill
      • Nut
      • Screw
      • Nozzle
      • Housing
      • Piston
      • Pinion
      • Fix Scroll Blank
      • Flange
      • Flanged Outer Cylinder
      • Bush
      • Plug
      • Plunger
      • Hexspot
      • Bearing
      • Bearing Case
      • Bearing Lock Nut
      • Hose Joint
      • Ball screw
      • Body
      • Holder
      • Main Shaft
      • Meter Unit
      • Motor Gear
      • Retainer
      • Ring
      • Locking Ring
      • Rod
      • Temperature Control Spindle
      • Rear Cover
      • Cam
      • Compact Pinion
      • Insert Ring
      • Output Shaft
      • Parallel Pipe Thread
      • Medium-sized Pinion
      • Flat Gear
      • Electrode
      • Front Cover
      • Woodworking Drill

MURATEC
STYLE What is MURATEC Turnkey?

“Just Push Start Button”

MURATEC Turnkey truly means that phrase.
MURATEC delivers a production line guaranteed by process capability, thanks to a gantry loader fully designed and manufactured in-house, variety of peripheral equipment and devices and coupled with an outstanding know-how of machining technology.
MURATEC turnkey has a proud history of over 40 years and more than 30 thousand production lines installed globally are even today in action with full strength.
MURATEC invites you to this turnkey experience with your next production line surely.

MURATEC
LAB Test Cutting / Research & Development

“Do you have any issues with machining process?”

MURATEC proposes solutions for your specific machining issues by undertaking test cutting on actual machine model proposed.
MURATEC also continually develops state-of-the-art machining technology by using variety of tools and related items.

MURATEC invites you to let us know your test cutting needs through the Enquiry Form provided.

SHOWROOM Tour of latest Machine Models

All the latest machine models are continuously on display at the Inuyama plant.
On request, all machines can be demonstrated for full operation.
For details, we invite you to send your request through the Enquiry Form provided.

SOCIAL
MEDIA

SUPPORT Customer Support

MURATEC CCS Ltd., a group company takes care of all after-sales service full-time support, preventive maintenance, re-location and overhaul of MURATEC machine tools.

MURATEC CCS (Customer Consulting and Satisfaction) was set up in the year 2000 as the after-sales support arm of MURAETC Machine Tool Division. Not only taking care of machine maintenance and service, the goal of total customer satisfaction is achieved by providing the important function of customer consulting service. MURATEC’s supplied equipment will be taken care for life-long stable use.

  • Japan
    • MURATA MACHINERY, LTD.

    NORTH & SOUTH AMERICA

    U.S.A.
    • MURATA MACHINERY USA, INC.
    Mexico
    • MURATA MACHINERY MEXICO S.DE R.L.DE C.V.
    Brasil
    • MURATA DO BRASIL, LTDA.

    EUROPE & MIDDLE EAST

    Europe
    • MURATA MACHINERY EUROPE GmbH
    Austria
    • WAMATEC GMBH
    Czech / Slovak
    • WEMCO CZECH S.R.O.
    France
    • TECHNI-CN
    Germany
    • WEMCO GMBH
    Hungary
    • WAMATEC HUNGARY KFT.
    Italy
    • ROSSI MACCHINE UTENSILI SPA
    Netherlands / Belgium
    • BENDERTECHNIEK B.V.
    Poland
    • DEMATEC POLSKA SP. Z O.O.
    Spain
    • MAQUINSER, S.A.
    Portugal
    • MAQUINSERtek, Lda.
    Sweden
    • MASKIN AB A. FRANSSON
    U.K.
    • MATSUURA MACHINERY, LTD.
    Turkey
    • ATLAS CNC MAKINA TICARET LTD. STI.

    ASIA

    China
    • MURATA MACHINERY (SHANGHAI) CO., LTD.
    Thailand
    • MURATA (THAILAND) CO., LTD.
    Indonesia
    • PT.MURATA MACHINERY INDONESIA
    Vietnam
    • MURATA MACHINERY VIETNAM CO., LTD
    India
    • MEIBAN ENGINEERING TECHNOLOGIES PVT. LTD.
  • Network in Japan

    Chuou-ku, Tokyo
    Tokyo Branch
    Ota-shi, Gunma
    Ota Branch
    Inuyama-shi, Aichi
    Nagoya Branch
    Osaka-shi, Osaka
    Osaka Branch
    Fukuyama-shi, Hiroshima
    Fukuyama Branch office

    Service bese (MURATEC CCS)

    Inuyama-shi, Aichi
    Management Department
    Hokkaido, Tohoku Area
    Hokkaido Branch office
    Fukushima Branch office
    Kanto, Shinetsu Area
    Ota Branch
    Tokai, Hokuriku area
    Inuyama Branch
    Mikawa Sales office
    Kakegawa Sales office
    Kanazawa Sales office
    Yokkaichi Sales office
    Kansai Area
    Kyoji Branch
    Hyogo Branch office
    Chugoku, Shikoku Area
    Fukuyama Branch office
    Kyushu Area
    Fukuoka Branch office

CONTACT

Contact Information

Thank you for visiting the MURATEC web site and your interests in our products.
We welcome all your inquiries, requests, comments and suggestions through this form.

    Note: All items are essential fields to process the enquiry.

    Company Name

    Name

    Company Address

    Phone

    E-mail

    Inquiry

    • We will get back to you from the person in charge.

    • Please note that it may take some time to answer some questions.

    • In principle, we will reply by phone or email.

    • The personal information you enter will be used to answer your inquiries.

    • In order to respond appropriately to inquiries, please note that we may provide your information to our affiliated companies and there are some cases that they may answer you.

    COMPANY

    Outline

    Company Name Murata Machinery, Ltd. 
    Japanese Name : Murata Kikai Kabushiki Kaisha
    Established July 1935
    Main office 136, Takeda-Mukaishiro-cho, Fushimi-ku, Kyoto 612-8418 Japan
    Branch office (Japan) Tokyo, Osaka, Nagoya
    Factories (Japan) Inuyama, Kaga, Ryuo, Oita, Ise, Gifu
    President Daisuke Murata
    Products Textile Machinery, Machine Tools, Sheet Metal Machinery,
    Automated Systems, Clean FA Systems,
    Communication Equipment
    Capital JPY 900 million
    Sales Consolidated: 391,800 million yen
    Non-Consolidated: 304,300 million yen
    (as of March 31, 2022)
    Employees 3700 [Group; 8100 ](as of April, 2022)
    ©️ 2021 Murata Machinery, Ltd.